How to use Drain Rods to Clear a Blocked Drain

Blocked Drains - Wiltshire Drainage

How to use Drain Rods to Clear a Blocked Drain

How to use Drain Rods to Clear a Blocked Drain

In situations where you have a drain blockage and you assess that you can take of it by yourself it is important to know that if not fixed properly or on time, it can cause flooding and several levels of damage to the piping system and the property.

Also, you would want to avoid unpleasant smells. One very efficient way of fixing the problem, in general, is by using flexible drains rods. And if you plan to do it yourself you need to know how to clean a smelly drain in bathroom sink. When you plan to do this, you need to have in mind that you need protective clothing, mask, gloves, and goggles. People’s safety is the most important. There are 3 very important steps to follow in order to make sure that the intervention will be successful. The first step is to identify the problem and where the blockage is. You could use a screwdriver to open the cover if the drain is covered. There may be more than one cover to the main sewer so you should start with the closest one to your house. The next thing you need to do is use the drain rods. This way you will be able to loosen the blockage. It’s important to always have your gloves on, to reach into the drain in order to try and find the blockage. Here a rubber plunger can help you if you can’t see the blockage, by attaching it to the rod and in that way you have more drain rods connected at once. You need to check if the plunger fits before you attach it. The back and forth pushing needs to be repeated several times right after you have located and reached the blockage. The obstruction will be cleared by the water pressure but you might also need to use more pressure in order to release the critical blockage. You need to be careful not to damage the drains. Also if there is an obstacle you need to use a double worm screw to break up paper blockages or similar. When you twist the rods it’s very important that the movement is clockwise because otherwise you will separate the parts and fail.

The final step is the washing. The moment you break up the blockage, it’s important to see if there is an important drop in the water level. Then you need to pour water down the pipes to wash the leftover debris and make a final check that there isn’t any blockage or debris left and the pipes are in an excellent order. Checking for damage is also a good idea because if there is one you can fix it and prevent a future problem. In the end, if everything is in order with the piping system you need to place the manhole cover back.

If in an unfortunate case every step you did state before wasn’t successful then you need to contact a professional plumber like the service Blocked Drains in Swindon to check and fix the problem with some other better equipment. Also, you need to inform the plumber about every step you made because it might help with figuring out the real problem and finding the right solution.

 

Share via